Collector, Mounting Post and Level Indicator ( RainLogger )
The RainLogger is a complete package containing a RainLog data logger, serial cable, RL-Loader 2 software and polypropylene rain collector and mounting post with mast. The tipping bucket rain gauge is calibrated to 0.01 inches / 0.25 mm per tip. Other calibrations are available on request. The National Weather Service suggests that the collector should be mounted 3 feet above the ground. It is also important that the mounting provides adequate drainage for the collector. The tipping bucket mechanism empties through two drains in its base.

• Battery Operated
• Meets National Weather Service specifications
• Lifetime guarantee on the collector
• One year capacity both logger and battery supply
• One minute time/date stamp resolution
• EEPROM Non-volatile memory
• Powered by one CR2477N battery
• Windows software included      
  
  The RAINLOGGER rain gauge requires two "AA" batteries.
  
  

RL-Loader 2 - Software

This free Windows based software package will run on Windows 98 or later. RL-Loader is used to configure and download data from the Rainlog. Data is displayed in both text and graphical formats. You can print graphs and reports directly. Previously saved data can be loaded to perform analysis and generate reports. The latest release can export data directly into Microsoft Excel. The device info window gives you vital information about the attached Rainlog, like its time/date and the amount of memory used. The text window displays daily totals or the list of rainfall events as they occurred. The graph window displays a bar chart of the daily rainfall totals. The graphing range is also configurable.

• New: RL-Loader Version 2.2 now supports Windows Vista.

MADE IN THE USA